EU project BioFibreLoopFirst coatings and textile patterns made from renewable and recyclable materials - EU project BioFibreLoop shows first results

28. Januar 2025
Sample fabric and film made from a lignin-cellulose mixture, Foto: DITF

The BioFibreLoop project aims to produce functional textiles from renewable and recyclable raw materials (lignin, cellulose and polylactide (PLA)). To protect these textiles from liquids, gases, UV light and bacteria, a thin coating of lignin is applied to the textile surface. The project is also developing a new, very environmentally friendly surface treatment to give the lignin coating increased water and oil repellency over and above its natural material properties.

Steinbeis Europa Zentrum supported the proposal writing process and is a project partner. It supports the coordinator, the German Institutes of Textile and Fibre Research (DITF), with administrative and financial project management. It is responsible for the communication, dissemination and exploitation of the project results.

After the first few months of the project, the DITF have managed to successfully spin the first fibres from lignin mixed with a suitable cellulose that increases suppleness and strength. The slightly brownish, fine and smooth continuous fibres show a slightly shimmering sheen in the small sample fabrics produced (see left image). In addition, the DITF were also able to produce the first films from the mixture of lignin with cellulose, which are used to coat the textiles (see right image). In the next step, once very thin and uniform variants have been successfully produced, these films are applied to the textiles in a laminating process and bonded. Further textile samples from the textile partners in Italy, Austria and Germany made from woven, knitted and nonwoven fabrics with fibres made from cellulose and PLA have already been produced and evaluated, and some of the selected variants have already been used to produce larger samples on industrial systems.

left: sample fabric and film made from a lignin-cellulose mixture - right: film for lamination onto the textile

BioFibreLoop has also made further progress in the development of the new technology for creating surfaces that repel water and oil. To this end, the researchers and employees involved intensively analysed previously known surface structures of certain plants and fish. The micro- and nanostructures on the surface are responsible the aforementioned functional properties. From the findings, it was possible to derive a physical thought model for a good understanding of the relationships between micro- and nanostructures and the properties of the liquids to be repelled. The major challenge now is to transfer these structures to the surfaces of the lignin coating using a novel, laser-based embossing process. In the laboratories of Centre Technologique ALPhANOV, France and the DITF, intensive research is already being carried out on metallic surfaces for transfer, special laser technologies and the many variants of the embossing technique.

Project facts

The BioFibreLoop project (number: 101130603) has a duration of 42 months (start: 01 June 2024), a participation of 13 partners and a total budget of 7 million euros (funded by the EU with 6.5 million euros).

For further information, please visit the website (https://biofibreloop.eu/) and/or contact the project coordinator Thomas Fischer (e-mail: thomas.fischer@ditf.de), DITF.

Success Story: 6.5 million euros EU funding for BioFibreLoop project and bio-based circular textile industry - Successful application for Deutsche Institute für Textil- und Faserforschung (DITF) - Steinbeis EN

Zu allen Artikel

Contact us!

Dr. Laura Merker
Laura Schmaltz
Contact us

Contact us!

Dr. Laura Merker
Laura Schmaltz

Customer references